Spin-On filters are used as process and safety filters to protect individual pumps, valves or the entire hydraulic circuit from contamination. All versions may be equipped with visual or electrical blockage indicators.
This series of spin on oil filter consist of a head mounted directly in-line with built-in bypass valve and a screw-on filter cartridge. The cartridge seals the spin on filter head to prevent leakage.
- Flow rates up to 320 l/min
- Operating pressure: 0.7Mpa
- Clogging indicators are available
- Temperatures from -30 °C to +90 °C
- Cast-aluminum filter head with bypass
Hydraulic spin on filters are economical low pressure filters with pressure capacity of up to 0.7Mpa.
There are no strong pressure surges. Spin on filter housing with a wide range of cleanliness ratings, are easy to replace without special equipment or tooling.
|Model||Flow Rate Return (L/min)||Flow Rate Suction (L/min)||Filtration (μm)||Pressure(Mpa)||Blow up press.(Mpa)||By-pass setting (Mpa)||Screw||Weight(kg)|
[widgets_on_pages id=”Contact – Pop”]