Filson Natural Gas Filters Separator

  • High gas capacity with a compact vessel structure
  • High filtration efficiency and less chance of blockage
  • Low operation and maintenance costs
  • Available in a broad range of filter size
  • Large dirt holding capacity
  • Low pressure drop at high natural gas flow rate

Filson natural gas filter separator has a high filtration efficiency up to 99.9% at 2 micron. And straight type and angle pattern gas filter with changeable filter element are available. Its size range from 1 inch to 6 inch.

  • Raw material: carbon steel, stainless steel and custom materials
  • Type: horizontal and vertical design vessel are available
  • Filtration rating: down to 0.3 micron
  • Filtration effect: 99.9% removal of solid particles (≥3 micron)
  • Coalescence ability: available for separation of liquid droplets with particle size >0.1 micron
  • Flow rate: 8000 NM3/H
  • Working temperature range: from -29℃ to 66℃
  • Initial pressure difference: less than 0.02MPa
  • Max operating pressure: 0.15MPa
  • Residual oil content: 0.01 mg/m3
  • Connection mode: flange and thread connection
  • Cartridge size: based on your requirement

Note: listed above are for reference purpose, please consult Filson for customization.

Send Your Inquiry Today

Filson Natural Gas Filters Separator

Your Reliable Natural Gas Filters Separator Manufacturer in China

Filson natural gas filter separator is an important equipment in natural gas transmission and distribution system. During the process, to protect flow-meter, regulator and valves from damage potential of solid and liquid impurities. So it must be installed in front of the critical equipment.

In Filson natural gas filter separators, removal of solid and liquid particles takes place gradually. At vessel inlet, larger particles are removed by gravitational effect due to the gas velocity decreasing and by impacting on inner surfaces.

Filson natural gas filter elements trap the smaller solid particles, while liquid droplets coalesce to be removed in the following stage consisting of a leaf unit. The contaminant is collected either in a separate container connected to the filter separator or in the same vessel out of the gas flow.

Any other questions? Click Here for more information.

Send Your Inquiry Today
Scroll to Top