Filson
Mist Eliminator

Your Perfect Mist Eliminator Choice for Minimizing Entrainment

Filson is one of the best mist eliminator manufacturers in China, supplying various mist eliminator types, such as mist eliminator pad (mist pad), vane type mist eliminator, cyclone mist eliminator, fiber mist eliminator. They are beneficial for various distillation columns, flue gas desulfurization, knockout drums, wet scrubbers, evaporators.

With reliable quality and economical price, Filson mist eliminator has served hundreds of companies from all over the world and was well received. Our experienced engineer team will accompany you throughout the entire process from design, production to delivery.

Mist Eliminator

Mesh Pad Mist Eliminator
Filson mesh pad mist eliminator, also named demister pad, wire mesh mist eliminator, commonly can be tailored in your specific required sizes by metallic or plastic materials. This type excels to remove 3-5 μm sizes liquid droplets particularly.
Vane Mist Eliminator
Filson vane mist eliminator, or known as vane type mist eliminator, vane pack mist eliminator, can be used to remove liquid droplets and solid particles in size of 8-50 μm. We customize various vane mist eliminator designs with hooked blades and stream line blades.
Chevron Mist Eliminator
Filson chevron mist eliminator, or called chevron type mist eliminator, owns baffle or zigzag blade modules to meet different accuracy and flow capacity requirements. Both vertical and horizontal styles can be installed for specific flow directions.
Mist Eliminator HVAC
Filson mist eliminator HVAC is an efficient solution for HVAC systems to remove mist entrainment from air intakes. It can easily avoid the adverse effects on indoor air quality and dramatically reduce below deck corrosion.
Mist Eliminator for Wet Scrubber
Filson mist eliminator for wet scrubber can be designed to mesh pad type, vane type and cyclone type to separate liquid entrainment and gases. It will assist wet scrubber to clear exhaust gas with high efficiency.
Cyclone Mist Eliminator
Filson cyclone mist eliminator features utilizing minimal diameter and weight design to handle maximal gas capacity by high centrifugal force. It is more suitable for elevated pressure condition than mesh pads and vane type mist eliminators.
PP Mist Eliminator
Filson PP mist eliminator is totally made of quality polypropylene material, has mesh and vane two type designs. Support grids can be added or not upon your request.
PVC Mist Eliminator
Filson PVC mist eliminator offers round, ring, rectangular, etc. common shapes and other unique shapes for installation space in different sizes. With high corrosion resistance and good oxidation resistance.
PE Mist Eliminator
Filson PE mist eliminator may be your perfect choice when you need a light weight mist eliminator with stable chemical compatibility. It is non-toxic thus suiting for food-related industries.
Fiber Mist Eliminator
Filson fiber mist eliminator features an unique cylindrical shape which distinct from other general mist eliminator types. We can also supply the replacement of Brink mist eliminator, with equal parameters and reliable quality.
Replacement Mist Eliminator
Filson replacement mist eliminator relies on the precise cross-referenced data and years of manufacturing experience, achieving superb separation performance with low operating costs. Filson supplies the replacement of Munters mist eliminator, Amacs mist eliminator, Koch mist eliminator, Kimre mist eliminator ...

Why Choose Filson Mist Eliminator?

Production: innovative designs and experienced manufacture for each independent project
Service: the fastest response for your inquiry and professional guidance throughout the use period
Delivery: the immediate delivery for standard types and within 10-20 days for customized types
Transport: working with major logistic companies for the fastest and safest transportation

Mist Eliminator Drawing

MIst Eliminator

Filson: Mist Eliminator Manufacturing Expert Serving the World

Filson mist eliminator is generally made of Stainless Steel, Titanium, Hastelloy, Inconel 625, Monel 400, PP(polypropylene), PE(polyethylene), PVC(polyvinyl chloride), FRP(fiberglass reinforced plastic) materials with high corrosion and abrasive resistance. Filson engineers are ready to help you with your most appropriate mist eliminator selection.

Filson mist eliminator particularly acts on the liquid droplets and entrained particles in size of 0.1 to over 50 microns. There are four optional types of mist eliminators from Filson for your specific removal entrainment sizes, including mesh, vane, cyclone, and fiber bed types.

Demister Mist Eliminator

If there is only liquid entrainment or mist which less than 10 microns in the gas, Filson mesh demister pads are your perfect choice; but if also solid particles and 8-50 micron entrainment in the gas, please pick Filson vane type or cyclone mist eliminator. Plus, the Filson fiber bed mist eliminator can handle even 0.1-micron droplets.

Mist Eliminator Type Removed Droplet Size(μm)

  • Mesh Pad 3-10
  • Vane type 8-50
  • Cyclone type 7-20
  • Fiber Bed Candle Filter 0.1-5

Filson mist eliminator can be an essential internal of desulphurization towers, absorption towers, distillation towers, scrubbing towers to minimize liquid entrainment. Commonly employed at the top of a packed column or in conjunction with a collecting tray between two packed beds.

fiber mist eliminator

Or Filson mist eliminator can be installed in some systems to converge mist into larger droplets and discharge. It plays an important role in a variety of machine coolant mist, chromic acid mist, sulfuric acid mist, and oil mist removal, to ensure that air emissions achieve environmentally acceptable levels.

For mesh pad and vane type mist eliminator, Filson designs both integrated and segmented two styles to meet different application sizes. Among, integrated style Filson mist eliminator is more suitable for relatively smaller towers, while segmented style is easier to transport and install for larger industrial systems.

By the way, do not worry about installation problems. There is an English manual coming with your mist eliminator to guide you, and our engineers will also assist you throughout the installing process.

mist eliminator material and types

Filson mist eliminator is provided the vertical and horizontal configurations to fit the different directions of gas flow. Vertical type allows a higher flow rate and is easy to avoid secondary entrainment, but requires a larger footprint. While horizontal type requires a smaller footprint and is easy to install, however available at a lower flow rate and is prone to secondary entrainment.

In addition, after a period of use, you are recommended to clean your Filson mist eliminator to reduce scaling and restore the optimum filtration efficiency. Design a backwashing unit in your system for regular cleaning, or dismantle it and spray with clean water, or soak it in the cleaning solution.

Not only standard mist eliminator supply, but Filson’s bespoke mist eliminators can also satisfy you with desired size, material, and shape. Just send us your specific application, required efficiency, droplet size, face velocity, or the drawing of the existing demister.

Besides, if you are searching for a quality mist eliminator with an economical mist eliminator price for your existing system, choose Filson. We design and manufacture mist eliminator replacements for almost all popular brands on the market, such as Emacs mist eliminator, Munter’s mist eliminator, Koch mist eliminator, Krime mist eliminator.

Each mist eliminator manufactured by Filson is strictly performance tested before leaving the factory and will be wrapped in plastic film and placed in a customized wooden case. Or a pallet inside to reduce pressure during loading.

If there is any doubt of mist eliminator material, mist eliminator pressure drop, mist eliminator design calculation, please feel free to contact Filson. Our mist eliminator specialists are 24/7 here to help you solve problems.

More information? Just a phone call or an email!
Phone: +86-157 3695 8886
Email: [email protected]

Looking forward to sincere cooperation with you TODAY!

What is Mist Eliminator

Plastic Vane Mist Elimination

Mist eliminator is a liquid-gas separator and typically divided into mesh pad type, vane type, cyclone type, and fiber bed type. Different mist eliminator types are suited for different entrained mist sizes.

They can effectively remove liquid droplets and solid particles from gases or vapor steam. Commonly used as a tower internal in various scrubbing towers, desulphurization towers, absorption towers, distillation towers, or other liquid-gas separation devices.

Mist Eliminator Function

plastic vane pack mist eliminator

  • Reduce loss of valuable chemicals like glycol, amine, or solvent in absorption towers
  • The update throughput capacity of existing systems without costly replacement
  • Protect downstream equipment like a turbine, blower, and compressor blades
  • Improve purity of products by preventing side draws contamination in distillation columns
  • Minimize air pollution by diminishing mist emissions to an environmentally acceptable level

Mist Eliminator Working Principle

The central principles of mist eliminator are collision, adherence, coalescence, drainage. When the gas containing mist flows through the mist eliminator at a specific speed, the mist in the gas collies with wires(or blades) and coalesce into larger droplets then dropdown. Thus the liquid and gas will be separated.

stainless steel metal mist pad

Multi-layer mesh wires or multi-fold plates constructions increase the chances of capturing mist, and unremoved mist can be collected at the next turning point. Mist removal efficiency increases with increasing flow rate, the higher flow rate, the greater inertia of mist, the more favorable to separate liquid and gas.

However, the increased flow rate of gases will cause an increase in system resistance while consuming more energy. Once the flow rate increase exceeds a specific limit, secondary entrainment is inevitable, thus reducing the mist removal efficiency.

FILSON Mist Eliminator Feature

  • Various types for droplets removal in different sizes
  • High separation efficiency to provide mist-free gases
  • Easy to install and remove with simplified maintenance
  • Cleanable and reusable with several cleaning methods
  • Flexible size and shape designs for diverse applications

FILSON Mist Eliminator Specification

  • Raw Material: SS 304/304L, 316/316L, Titanium, Nickel, Monel 400, Inconel 625, Hastelloy, PP, PE, PVC, PTFE(Teflon/F4), FRP(fiberglass reinforced plastic)
  • Design Gas Velocity: 3.5-5.5 m/s
  • Mist Removal Efficiency: 95-99.9 %
  • Type: mesh pad, vane type, cyclone type, fiber candle filter
  • Droplet Size: 0.1-50 micron
  • Operating Temperature: upon the material
  • Pressure Drop: less than 120 Pa

FILSON Mist Eliminator Application

  • Flue Gas Desulfurization
  • Refineries
  • Petrochemical Plants
  • Gas Absorption Systems
  • Sulfuric Acid Plants
  • Knockout Drums
  • Evaporators
  • Steam Drums
  • Distillation Towers
  • Wet Scrubbers
Send Your Inquiry
Scroll to Top