Filson Inline Aeration Stone
- Able to be applied to high thermal and corrosive environments
- Quality construction material to meet any of your application needs
- Increased air to water contact area for high efficiency
- Excellent performance due to advanced sintering technology
- Reduced gas consumption for maximum cost savings
- Specifications
- Send Us Inquiry
The most important part in the oxygenation setup is the oxygen stone. At Filson, we offer inline aeration stone with micron rating of 0.2 – 100 μm and porosity of 35 – 50 %. And other specifications are listed below.
- Body material: SS 304, SS 316/316 L, Titanium, Nickel, Hastelloy and more
- Working temperature: up to 600℃
- Working pressure: maximum 3.4MPa ( typically 0.2 – 2MPa )
- Micron rating: most effective from 0.5 to 3 μm (usually 0.5 or 2 micron)
- Porosity: 35 – 50 %
- Length: 1 – 12 inch ( mostly 1 – 4 inch )
- Connection: tri-clamp, BSP/NPT threads, flange, barb, straight tube
Send Your Inquiry Today
Filson Inline Aeration Stone
Your Reliable Inline Aeration Stone Supplier in China
Filson inline aeration stone is a high-efficiency and cost-effective device to benefit your business. It works well as it fits the system greatly and delivers oxygen at a consistent rate with an optimum amount of surface area.
Filson inline aeration stone is a sintered stone with a tri-clamp or other connections made of stainless steel 316. Usually, a 4-inch aeration stone is enough for the application. But in cases with larger systems, sometimes a 6 inch, 8 inches, or larger 12 inch stone may be required to ensure optimal aeration.
Filson inline aeration stone is customizable at Filson. With a flexible connection design, the stone can be connected in line with any of your equipment to support aeration.
Filson is looking forward to becoming your next inline aeration stone supplier. Contact us now!