High pressure filters are designed to be installed in hydraulic piping systems to guarantee safety and protection to the entire hydraulic circuit from contamination. Being compact and long-lasting in nature, high pressure hydraulic filters consist of a filter head with screw-in filter bowl, making easy to remove and clean.
- Extensive model range
- High stability and reliability
- Numerous connection variants
- Connection for a bypass valve
- Operating pressure up to 32 Mpa
- Filter housing made of steel
Its flow capacity is up to 660 l/min and a maximum pressure capacity of 32 Mpa. Filson High pressure simplex strainers may be specified with or without a clogging indicator.
Both the cover and bodies use O-ring seals to provide positive and reliable sealing. Elements with high differential pressure stability and dirt holding capacity help to improve operational safety and extend service life.
|Flow Rate||25 – 7800 L/min|
|Temperature||-30°-121°C(-22° to 250°F)|
|Connection||DN20 – DN250|
|Working Pressure||≤2.5 Mpa|
|Pressure Loss||≤0.35 Mpa|
|Filtration||3, 5, 10, 20, 40,100 μm|
|By-pass setting||4 Mpa|
|Supply Power||24V/48W, 220V/50W|
High Pressure Filter
Screw-in filter bowl
Lightweight, filter bowl together with the filter element can be easily taken out of the filter head.
Variety customizable colors, Industrial powder-coated paint
Used for install indicator, indicating when to change filter elements
Dumping oil before changing elements.
Help to keep the inside working area clean.
SAE 4-bolt flange to allow easy installation
Anti-skid treatment surface
To resist skidding by increasing traction. Providing complete protection to your palms.
Industrial quality. It can be installed in minimal storage space.