Filson Filter Press For Sludge Dewatering
- High solids content in the filter cake
- Reasonable design for safe and stable operation
- Advanced welding technology for compact and robust construction
- Reduced costs with high dewatering efficiency
- Quality raw material leading to long service life
- Specifications
- Send Us Inquiry
Filtration is the most widely used method to deal with sludge produced by wastewater treatment. With Filson filter press for sludge dewatering, disposing of suspended solids will become easier and more cost-effective than using other equipments.
- Plate material: stainless steel, cast iron, nickel, aluminium, monel, plastic ( PP, PE )
- Operating pressure: 0.3 – 0.6 MPa
- Frame length of side: 200 – 2000mm
- Frame thickness: 16 – 80 mm
- Filtration surface: 0.5 m2 – 1200 m2
- Plate size: 250 x 250mm to 1500 x 2000mm
- Plate shape: square, rectangular
Note: specifications listed above are for reference only, contact Filson for more details.
Send Your Inquiry Today
Filson Filter Press For Sludge Dewatering
Your Valuable Filter Press Choice For Sludge Dewatering
Filson filter press is highly efficient for removing water ( dewatering ) from sludge. It works depending on feed pressure and is suitable to be used for high volume separation of solids from slurries, utilizing recessed or membrane plates.
The working process of Filson filter press for sludge dewatering:
- When the sludge passes through the filter plates, the discharge system and the filter medium ( filter cloth ) collect the solid particulates.
- The slurry is continually pressed into the system until all the water is squeezed out.
- The remaining solids form a filter cake between two plates and will be discharged by the dead weight.
Filson provides a large variety of dewatering solutions, including but not limited to plate and frame filter press, belt filter press, vertical filter press and horizontal filter press. So if you want an ideal product for your sludge dewatering project, please contact us now.