Filson 3 Micron Compressed Air Filter

  • Protecting downstream precise filters, equipment as a pre-filter
  • The most common use in the compressors and pneumatic system
  • ISO 8573 quality as well as a competitive price and good service
  • Low air flow resistance, minimum pressure differential loss
  • Reliable filtration performance to provide clean and dry compressed air
  • Protect downstream critical equipment from contamination damage

Filson 3 micron compressed air filter, also called 3 micron compressed air separator, it is used for eliminating oil, water, rust, and other contaminates from compressed air. Its solid separation level is 3 grade, oil separation is 5 grade.

  • Construction material: 304/316L stainless steel, aluminum alloy
  • Medium material: fiberglass, stainless steel, polyester, etc
  • Cartridge length: from 5 inch to 50 inch or custom
  • Dimensions: at your request
  • Filtration rating: 3 micron or larger
  • Filtration efficiency: up to 99.99%
  • Flow capacity: up to 3600m3/h
  • Threaded filter connection: 1/4 inch to 3 inch
  • Maximum operating temperature: from -20℃ to 105 ℃
  • Maximum working pressure: up to 25bar
  • Connection mode: NPT/BSP thread and flange connections
  • Connection size: 1/4 inch to 1 inch or tailor-made
  • Port size: 1/4, 3/8, 1/2 inch
  • Accessories: pressure differential gauge, auto drain port, etc

Send Your Inquiry Today

Filson 3 Micron Compressed Air Filter

Your Best 3 Micron Compressed Air Filter Supplier in China

Filson 3 micron compressed air filter is used for solid and liquid particles with dimensions larger than 3 micron. Its maximum residual oil content is 5ppm w/w and maximum liquid load in intake is 20.000 ppm w/w.

It is recommend that Filson compressor air filters are usually installed after the cooling device and air gas tank at a place near the point of use with the lowest temperature. This enables oil and stream to condense and form dew as much as possible to be collected by the filter.

Filson 3 micron compressed air filter is commonly installed after the gas storage tank and before the cold dryer. It is recommend that Filson 3 micron compressed air filter ought to be installed in vertical direction, leaving sufficient space for replacing the filter elements.

Any other questions? Click Here for more information.

Send Your Inquiry Today
Scroll to Top